A Leader In Mass Transfer Tower Packing Since 1988. - JIANGXI KELLEY CHEMICAL PACKING CO., LTD

Plastic Conjugated Ring With PP / PE/CPVC

Plastic Conjugated Ring is made from heat resistant and chemical corrosion resistant plastics, combined the advantages of ring packing and saddle packing, adopts conjugate curve fin structure, and the two ends are externally crimped, and the ratio of length to diameter is appropriate. The packing gap or packing with the tower wall gap are point contact , So it makes the packing without overlapping. The pores are uniform, the resistance is small, the directional arrangement is adopted when the stacking is disordered, it has structured packing characteristics. And it has as good fluid mechanics and mass transfer performance.


Product Detail

Product Tags

Material

Our Factory assure all tower packing made from 100% Virgin Material.

Technical Data Sheet

Product Name

Plastic Conjugated Ring

Material

             PP,PE,PVC,CPVC,PVDF ,etc

Life Span

>3 years

Size

Inch/mm

Surface Area

m2/m3

Void Volume

%

Packing Number

pieces/ m3

Packing Density

Kg/m3

Dry Packing Factor m-1

1”

25×25×1.0

185

95

74000

96

216

1.5”

37×37×1.5

142

91

16320

57.7

168

2”

50×40×1.5

104

80

9500

52

164

3”

76×76×2.6

81

95

3980

64.8

94

4”

100x100x2.0

55

96

1850

48

62

Feature

 High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.

              Advantage

1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability.

2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.

Application

These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

 

Physical & Chemical properties

Performace/Material

PE

PP

RPP

PVC

CPVC

PVDF

Density (g/cm3)    (after injection molding)

0.98

0.96

1.2

1.7

1.8

1.8

Operation Temp.(℃)

90

>100

>120

>60

>90

>150

Chemical Corrosion resistance

GOOD

GOOD

GOOD

GOOD

GOOD

GOOD

Compression Strength (Mpa)

>6.0

>6.0

>6.0

>6.0

>6.0

>6.0


  • Previous:
  • Next:

  • Related Products