A Leader In Mass Transfer Tower Packing Since 1988. - JIANGXI KELLEY CHEMICAL PACKING CO., LTD

Plastic Q-pack With PP / PE/CPVC

Plastic Q-pack has large pore volumes and surface areas make it an ideal media for biological treatment of drinking water. Bio film processes are excellent for treating raw water containing ammonia, manganese, iron etc. In conventional filtration processes Q-pack can be used in different ways. In dual media filters Q-pack can be used in combination with sand. Tests have shown that Q-pack operates as well as or better than traditional filter media in these types of filters.Q-pack can not only be used in traditional drinking water treatment, but also in treatment of saline water. In desalination plants one of the most important parts is the pre-treatment process. Q-pack is an excellent filter media for use in pre-treatment filters in desalination plants.


Product Detail

Product Tags

Technical Data Sheet

Product Name

Plastic Q-pack

Material

             PP,PE,PVC,CPVC,PVDF ,etc

Life Span

>3 years

Size

mm

Drip several

Void Volume

%

Packing        Number

pieces/ m3

Packing      Density

Kg/m3

Dry Packing Factor m-1

82.5*95

388

96.3

1165

33.7

23

Feature

High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.

Advantage

1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability.

2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.

Application

These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 150°.

Physical & Chemical properties

Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C.

Performace/Material

PE

PP

RPP

PVC

CPVC

PVDF

Density(g/cm3)               (after injection molding)

0.98

0.96

1.2

1.7

1.8

1.8

Operation Temp.(℃)

90

>100

>120

>60

>90

>150

Chemical Corrosion resistance

GOOD

GOOD

GOOD

GOOD

GOOD

GOOD

Compression Strength(Mpa)

>6.0

>6.0

>6.0

>6.0

>6.0

>6.0


  • Previous:
  • Next:

  • Related Products