Short Lead Time for Plastic Hiflow Ring - Plastic Pentagon Ring With PP / PE/CPVC – Kelley
Short Lead Time for Plastic Hiflow Ring - Plastic Pentagon Ring With PP / PE/CPVC – Kelley Detail:
Technical Data Sheet
|
Product Name |
Plastic Pentagon Ring |
|||||
|
Material |
PP,PE,PVC,CPVC,PVDF ,etc | |||||
|
Life Span |
>3 years |
|||||
|
Size |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing Factor m-1 |
|
|
Inch |
mm |
|||||
|
1-1/2” |
38*12*1.2 |
246 |
95 |
46000 |
112 |
260.3 |
|
2” |
50*17*1.5 |
218 |
97 |
21500 |
107 |
225.2 |
|
3” |
76*26*2.5 |
198 |
96 |
6500 |
92 |
207.1 |
|
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. | |||||
|
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability.2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. | |||||
|
Application |
These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°. | |||||
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C.
| Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
| Density(g/cm3) (after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
| Operation Temp.(℃) |
90 |
＞100 |
＞120 |
＞60 |
＞90 |
＞150 |
| Chemical Corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
| Compression Strength(Mpa) |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
Product detail pictures:
Related Product Guide:
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Short Lead Time for Plastic Hiflow Ring - Plastic Pentagon Ring With PP / PE/CPVC – Kelley, The product will supply to all over the world, such as: Belgium, Ukraine, Belgium, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By ROGER Rivkin from Los Angeles - 2017.11.11 11:41
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Letitia from Finland - 2018.08.12 12:27
