PriceList for 17% Inert Ceramic Ball - 30% Inert Ceramic Ball – Catalyst Support Media – Kelley
PriceList for 17% Inert Ceramic Ball - 30% Inert Ceramic Ball – Catalyst Support Media – Kelley Detail:
Application
30%AL2O3 type Inert Ceramic Ball are widely used in petroleum, chemical, fertilizer, gas and environmental protection industries, as a catalyst in the reactor to cover support material and tower packing.It has a high temperature and high pressure resistance, bibulous rate is low, the characteristics of the chemical performance is stable.Can withstand the erosion of acid, alkali and other organic solvents, and can endure in the production process of temperature changes.Its main function is to increase gas or liquid distribution points, support and protection intensity is not high of the catalyst.
Chemical Composition
|
Al2O3+SiO2 |
Al2O3 |
SiO2 |
Fe2O3 |
MgO |
K2O+Na2O+CaO |
Other |
|
> 92% |
30% |
62% |
<1% |
<2.5% |
<4% |
<0.5% |
Leach able Fe2O3is less than 0.1%
Physical Properties
|
Item |
Value |
|
Water absorption (%) |
<0.5 |
|
Bulk density (g/cm3) |
1.38-1.4 |
|
Specific gravity (g/cm3) |
2.3-2.4 |
|
Free volume (%) |
40 |
|
Operation temp.(max) (℃) |
1100 |
|
Moh’s hardness (scale) |
>6.5 |
|
Acid resistance (%) |
>99.6 |
|
Alkali resistance (%) |
>85 |
Crush Strength
|
Size |
Crush strength |
|
|
Kgf/particle |
KN/particle |
|
|
1/8”(3mm) |
>20 |
>0.20 |
|
1/4”(6mm) |
>50 |
>0.50 |
|
3/8”(10mm) |
>85 |
>0.85 |
|
1/2”(13mm) |
>180 |
>1.80 |
|
3/4”(19mm) |
>430 |
>4.30 |
|
1”(25mm) |
>620 |
>6.20 |
|
1-1/2”(38mm) |
>880 |
>8.80 |
|
2”(50mm) |
>1200 |
>12.0 |
Size and Tolerance (mm)
|
Size |
3/6/9 |
9/13 |
19/25/38 |
50 |
|
Tolerance |
±1.0 |
±1.5 |
±2 |
±2.5 |
Product detail pictures:
Related Product Guide:
We're commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for PriceList for 17% Inert Ceramic Ball - 30% Inert Ceramic Ball – Catalyst Support Media – Kelley, The product will supply to all over the world, such as: Argentina, Miami, New Orleans, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Rachel from Armenia - 2017.09.22 11:32
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Michelle from Miami - 2018.11.11 19:52
