Plastic Hollow Floating Ball With PP / PE/CPVC

Plastic Hollow Floating Ball has the characteristics of good absorption effect and high purification effect rate. It is widely used in chemical industry exhaust gas purification, flue gas dust removal, exhaust gas recovery, acid mist purification, etc. The plastic hollow float has the characteristics of stable center of gravity, overlapping edges and good covering effect, and can be widely used in various horizontal acid storage tanks.
The condensate storage tank and desalinated water tank in water treatment greatly reduce heat loss, reduce the pollution of acid mist and carbon dioxide and oxygen in the air to water, protect the health of operators, maintain water quality, save energy, and purify the environment.
It is suitable for various horizontal acid storage tanks in petroleum, chemical, chlor-alkali, gas, smelting, environmental protection, power and other enterprises, as well as condensed water storage tanks and demineralized water tanks in water treatment, which greatly reduces acid fog.

Send email to us

Product Detail

Product Tags

Material

Our Factory assure all tower packing made from 100% Virgin Material.

Technical Data Sheet

Product Name		Polyhedral Hollow Ball
Material		PP PVC RPP PFA CPVC HDPE PTFE ETFE ABS
Life Span		>3 years
Size (mm)	Average weight(g)	Number(pet ft²)	Number(pet m²)
10	0.2	1076	11600
20	1.0	270	2900
25	1.5	172	1850
38	4.5	74	800
45	7.0	53	570
50	8.0	43	465
55	10.5	35	380
70	16.0	22	235
100	40	10	116
150	100	5	55
Feature	High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage	1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application	It is widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries.

Physical & Chemical properties

Performace/Material	PE	PP	RPP	PVC	CPVC	PVDF
Density (g/cm3) (after injection molding)	0.98	0.96	1.2	1.7	1.8	1.8
Operation Temp.(℃)	90	＞100	＞120	＞60	＞90	＞150
Chemical Corrosion resistance	GOOD	GOOD	GOOD	GOOD	GOOD	GOOD
Compression Strength (Mpa)	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0