Plastic Flat Ring With PP / PE/CPVC

Plastic Flat Ring has a small ratio of height to diameter, about 1:3.Due to its structure’s change,effectively reducing the filler layer axial back mixing so as to improve the liquid-liquid mass transfer efficiency between two phases.Moreover, it is suitable for such packing liquid-liquid mass transfer of the extraction process.The Flat ring packing is similar to ring of the Cascade Mini Ring on the structure,but there are no top turn ups,guarantee packing unify orientation when piling up,increase pile density,make packing layer liquid distribute further more even improved inside separate efficiency.

Send email to us

Product Detail

Product Tags

Material

Our Factory assure all tower packing made from 100% Virgin Material.

Technical Data Sheet

Product Name			Plastic Flat Ring
Material			PP,PE,PVC,CPVC,PVDF ,etc
Life Span			>3 years
Size Inch/mm		Surface Area m2/m3	Void Volume %	Packing Number pieces/ m³	Dry Packing Factor m^-1
1”	25×9×1.0	160	88	170000	287
1-1/2”	38×13×1.2	145	92	460000	175
2”	50×17×1.5	128	93	21500	140
3”	76×26×2.5	116	93	6500	112
Feature		High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage		1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application		These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

Physical & Chemical properties

Performace/Material	PE	PP	RPP	PVC	CPVC	PVDF
Density (g/cm3) (after injection molding)	0.98	0.96	1.2	1.7	1.8	1.8
Operation Temp.(℃)	90	＞100	＞120	＞60	＞90	＞150
Chemical Corrosion resistance	GOOD	GOOD	GOOD	GOOD	GOOD	GOOD
Compression Strength (Mpa)	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0