OEM/ODM Supplier Inert Ceramic Ball For Catalyst Support - Porous Ceramic Ball Manufacturer with different size – Kelley

Product Detail

Product Tags

Feedback (2)

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Rosette Ring , Ceramic Ball Support Media , Heat Stroage Ceramic Mini Lessing Ring , We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.

OEM/ODM Supplier Inert Ceramic Ball For Catalyst Support - Porous Ceramic Ball Manufacturer with different size – Kelley Detail:

Application

Porous ceramic ball is a new product developed on the basis of the inert alumina ceramic ball. It takes the diameter of the ball as the axis to open the hole. It not only has certain mechanical strength, chemical stability and thermal stability, but also increases the specific surface area. And the void ratio, thereby increasing the dispersion and flux of the material, and reducing the resistance of the system. It can be widely used in petroleum, chemical and natural gas industries to replace inert alumina ceramic balls as catalyst covering support fillers.

Physical Properties

Type		Feldspar	Feldspar- Molai		Molai Stone		Molai- Corundum		Corundum
Item
Chemical Content (%)	Al2O3	20-30	30-45		45-70		70-90		≥90
	Al2O3+ SiO2	≥90
	Fe2O3	≤1
Water Adsorption (%)		≤5
Acid Resistance (%)		≥98
Alkaki Resistance (%)		≥80		≥82		≥85		≥90		≥95
Operation Temperature(°C)		≥1300		≥1400		≥1500		≥1600		≥1700
Crushing Strength (N/Piece)	Φ3mm	≥400		≥420		≥440		≥480		≥500
	Φ6mm	≥480		≥520		≥600		≥620		≥650
	Φ8mm	≥600		≥700		≥800		≥900		≥1000
	Φ10mm	≥1000		≥1100		≥1300		≥1500		≥1800
	Φ13mm	≥1500		≥1600		≥1800		≥2300		≥2600
	Φ16mm	≥1800		≥2000		≥2300		≥2800		≥3200
	Φ20mm	≥2500		≥2800		≥3200		≥3600		≥4000
	Φ25mm	≥3000		≥3200		≥3500		≥4000		≥4500
	Φ30mm	≥4000		≥4500		≥5000		≥5500		≥6000
	Φ38mm	≥6000		≥6500		≥7000		≥8500		≥10000
	Φ50mm	≥8000		≥8500		≥9000		≥10000		≥12000
	Φ75mm	≥10000		≥11000		≥12000		≥14000		≥15000
Bulk Density (kg/m³)		1100-1200		1200-1300		1300-1400		1400-1550		≥1550

Size and Tolerance(mm)

Diameter	6 /8 /10	13 /16 /20 /25	30 /38 /50	60 /75
Tolerance of diameter	±1.0	±1.5	±2.0	±3.0
Pore diameter	2-3	3-5	5-8	8-10

Product detail pictures:

Related Product Guide:

Our commission is to serve our users and clients with best quality and competitive portable digital products for OEM/ODM Supplier Inert Ceramic Ball For Catalyst Support - Porous Ceramic Ball Manufacturer with different size – Kelley, The product will supply to all over the world, such as: Ghana, Bolivia, Belgium, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

1 Inch Ceramic Ball