New Fashion Design for Plastic Snowflake Packing - PTFE Pall with 0.8″/1″/1.5″/2″/2.6″/3″ – Kelley
New Fashion Design for Plastic Snowflake Packing - PTFE Pall with 0.8″/1″/1.5″/2″/2.6″/3″ – Kelley Detail:
Advantage
1. Low pressure drop,
2.Large void space,
3.Large flux,
4.High mass-transfer efficiency,
5.Low energy consumption etc.
6. Excellent distribution in tower packing.
7. Operational temperature range: Up to +160°c
Technical Data Sheet
|
Product Name |
PTFE Pall Ring |
|||
|
Material |
PTFE |
|||
|
Size mm |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
|
20*20*2 |
267 |
92.8 |
125000 |
550 |
|
25*25*2 |
219 |
93.4 |
60000 |
450 |
|
38*38*2.5 |
165 |
94.6 |
15800 |
420 |
|
50*50*4 |
108 |
94.5 |
6800 |
450 |
|
65*65*5 |
84 |
94.8 |
4600 |
500 |
|
76*76*4 |
73 |
92 |
2000 |
300 |
Physical & Chemical properties
| Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
| Density(g/cm3) (after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
| Operation Temp.(℃) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
| Chemical Corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
| Compression Strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Product detail pictures:



Related Product Guide:
With this motto in mind, we've got become among essentially the most technologically innovative, cost-efficient, and price-competitive manufacturers for New Fashion Design for Plastic Snowflake Packing - PTFE Pall with 0.8″/1″/1.5″/2″/2.6″/3″ – Kelley, The product will supply to all over the world, such as: Algeria, kazan, Mexico, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!




