A Leader In Mass Transfer Tower Packing Since 1988. - JIANGXI KELLEY CHEMICAL PACKING CO., LTD

Good quality Ceramic Ball Stock - Thermal Storage Ball with different Alumina content – Kelley


Product Detail

Product Tags

Related Video

Feedback (2)

To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for Cs Flat Ring , 10mm Raschig Ring , 76mm Raschig Ring , Clients to start with! Whatever you require, we should do our utmost to aid you. We warmly welcome prospects from everywhere in the entire world to cooperate with us for mutual enhancement.
Good quality Ceramic Ball Stock - Thermal Storage Ball with different Alumina content – Kelley Detail:

Product Detail

Thermal storage ball is made of kaolin, aluminum oxide, mullite crystals, synthetic aggregates and other materials. According to the two methods of machine pressing and roll forming. The product has low thermal resistance, high density, high temperature resistance, corrosion resistance, high strength, good thermal conductivity, oxidation resistance, strong slag resistance, large thermal conductivity and heat capacity, high heat storage efficiency; good thermal stability and difficult temperature changes Fragmentation and other advantages. The specific surface area can reach 240m2/m3. When in use, many small balls divide the airflow into very small streams. When the airflow passes through the heat storage body, a strong turbulence is formed, which effectively breaks the boundary layer on the surface of the heat storage body. Because of the small diameter of the ball, With small conduction radius, small thermal resistance, high density, and good thermal conductivity, it can meet the requirements of frequent and rapid reversing of the regenerative burner.
This technology uses dual preheating of gas and air to achieve stable ignition even with low calorific value inferior fuels, so that the combustion temperature can quickly reach the requirements of steel rolling for heating billets. At the same time, it is easy to replace and clean, can be reused, and has a long service life.
The regenerator can use the reversal of 20-30 times/h, and the high-temperature flue gas can be discharged after passing through the bed of the regenerator to reduce the flue gas to about 130°C.
The high-temperature coal gas and air flow through the heat storage body in the same path and can be respectively preheated to only about 100℃ lower than the flue gas temperature, and the temperature efficiency is as high as 90% or more.
Because the volume of the heat storage body is very small and the flow capacity of the small pebble bed is strong, even if the resistance increases after ash accumulation, the heat exchange index will not be affected.

Physical Properties

Type

APG Heat Storage Ball

Heating Furnace Storage Ball

Item

Chemical Content
(%)

Al2O3

20-30

60-65

Al2O3+ SiO2

≥90

≥90

Fe2O3

≤1

≤1.5

Size(mm)

10-20/12-14

16-18/20-25

Thermsl Capacity   (J/kg.k)

≥836

≥1000

Thermal Conductivity(w/m.k)

2.6-2.9

High blast Temperature(°C)

800

1000

Bulk Density            (kg/m3)

1300-1400

1500-1600

Refractoriness(°C)

1550

1750

Wear rate(%)

≤0.1

≤0.1

Moh’s Hardness(Scal)

≥6.5

≥6.5

Compressive Strength(N)

800-1200

1800-3200


Product detail pictures:

Good quality  Ceramic Ball Stock  - Thermal Storage Ball with different Alumina content – Kelley detail pictures

Good quality  Ceramic Ball Stock  - Thermal Storage Ball with different Alumina content – Kelley detail pictures


Related Product Guide:

Adhering to your principle of "quality, assistance, performance and growth", we have now gained trusts and praises from domestic and international customer for Good quality Ceramic Ball Stock - Thermal Storage Ball with different Alumina content – Kelley, The product will supply to all over the world, such as: Sri Lanka, French, Georgia, We supply skilled service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound items with good logistics service and economical cost. Depending on this, our products and solutions are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ??customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
  • This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
    5 Stars By Marian from Mombasa - 2018.09.23 17:37
    It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
    5 Stars By Gustave from Palestine - 2017.08.18 11:04

    Related Products